MENU
"Recognized No.1 Custom Retailer In The U.S.A." - by CE Pro

Crestron C2NDAP8RC

C2N-DAP8RC 7.1 Surround Sound Processor and Room Solution Box

$ 3400 00
Free Expedite Delivery
Similar Product
  • Features
  • Specifications
  • Product Wiki
  • Extended Warranty

Features


The C2N-DAP8RC is a professional surround sound processor, video switcher, and control interface in a single package. As part of a complete Crestron Home. AV distribution system, the C2N-DPA8RC delivers cost-effective, high-end audio processing, AV signal routing, and device control. Having no front panel controls, the C2N-DAP8RC allows each installation to be equipped with just the right balance of automation and adjustability to suit the needs of the end-user. Whether using a touchpanel, keypad, handheld remote, or computer, the user interface is completely customizable, so control of the C2N-DAP8RC can be largely preset to simplify operation for the technically-challenged, or it can be extensively "tweakable" to indulge the most avid theater enthusiast.

What's included in the box


  • Professional surround sound processor
  • High-bandwidth video matrix switcher
  • Bidirectional CAT5 balanced audio & video
  • Fully customizable touchpanel control
  • Analog Devices SHARC 32-bit floating point DSP
  • Dolby Digital EX and Dolby Prologic II surround modes
  • Precision 24-bit 96 kHz A/D converters
  • 7.1 output featuring 24-bit 192 kHz D/A converters
  • 6-band parametric EQ and 20 mS delay per output
  • Discrete subwoofer output w/LFE and bass management
  • Three stereo outputs for remote zones and recording
  • 2 coaxial and 2 optical digital audio inputs
  • 5 unbalanced analog stereo inputs
  • 12 unbalanced video inputs and outputs
  • CAT5 video in, video out, and audio ports
  • Built-in video signal sensing
  • Optional current sensor
  • Optional IR remote receiver
  • Audio setup using Digital Media Tools software
  • Fully configurable in SystemBuilder software
  • Controllable via Cresnet communications

Specifications

Video & Digital Audio
  • Signal Types: Component (YPbPr), S-Video (Y/C), or composite video; digital audio
  • Video/HDTV Formats: 480i (NTSC), 576i (PAL), 480p, 576p, 720p, 1080i
  • Digital Audio Format: S/PDIF coaxial
  • Bandwidth : >100MHz (unbalanced)
  • Crosstalk <-60dB
  • S/N :>70dB
Audio – Surround Sound Processor
  • Processor : Analog Devices SHARC 32-bit floating point DSP
  • A-D Conversion: 24-bit 96 kHz
  • D-A Conversion: 24-bit 192 kHz
Two-Channel Modes:
  • PCM up to 96 kHz (normal stereo);
  • Dolby Pro Logic II (Pro Logic, Matrix, Movie, Music);
  • DTS Neo:6 (5.1 Cinema, 6.1 Cinema, 5.1 Music, 6.1 Music)

Multi-Channel Modes
  • Dolby Digital 5.1;
  • Dolby Digital EX;
  • DTS 5.1;
  • DTS ES Discrete 6.1;
  • DTS ES Matrix 6.1
Master Volume
  • -80dB to +20dB, 0.1dB steps
Surround Output Volume
  • ±12dB, 0.1dB steps from DMT;
  • ±30dB, 0.1dB steps from SIMPL
Low Frequency Effects (LFE)
  • -10dB to +0dB, 0.1dB steps from DMT;
  • -15dB to +0dB, 0.1dB steps from SIMPL
Mode Trim (Level Preset)
  • -80dB to +20dB, 0.1dB steps (master);
  • -30dB to +12dB, 0.1dB steps (per output);
  • -15dB to +0dB, 0.1dB steps (LFE)

Analog Input Gain: ±10dB, 0.1dB steps
  • Mute: -80dB (electronic), >-100dB (relay)
  • Bass Gain Range: ±18dB, 0.1dB steps
  • Treble Gain Range: ±18dB, 0.1dB steps
EQ Modes
  • 6-band parametric; 3-band graphic + 3-band parametric; 5-band graphic + 1-band parametric (Independent PEQ per surround/subwoofer channel; global GEQ excluding subwoofer channel)
PEQ Filter Gain
  • ±12dB, 0.1dB steps from DMT;
  • ±24dB, 0.1dB steps from SIMPL

PEQ Filter Bandwidth: 0.02 to 2.0 octaves (1.0 to 3.0 for shelving)

PEQ Filter Center Frequency
  • 15Hz to 19.9kHz from DMT;
  • 20Hz to 20KHz from SIMPL
PEQ Filter Types: low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf

GEQ Filter Gain:
  • +5/-10dB, 0.1dB steps
  • GEQ Filter Center Frequencies
  • 63, 250, 1k, 4k, 10k Hz (5-band);
  • 250, 1k, 4k Hz (3-band)
Crossover Frequency: 80Hz, 100Hz, 120Hz
Maximum Delay: 20mS per channel
Dynamic Range (compression): Minimum, Standard, Maximum, Variable 0-100%
Sub Limit: -25dB to +0dB, 0.1dB steps
Frequency Response: 20Hz to 20kHz ±0.2dB
THD+N: <0.0009% at 1 kHz maximum output level
S/N Ratio: >113dB
Dynamic Range: >113dB

Audio – Stereo Preamp
  • Controls: Volume, Balance, Bass, Treble, Loudness, Mute, Mono
  • Volume Gain Range: -80dB to +20dB, 1 dB steps
  • Mute: -80dB (electronic), >-100dB (relay)
  • Bass Gain Range: ±14dB
  • Treble Gain Range: ±14dB
  • Frequency Response: 20Hz to 20kHz ±0.2dB
  • THD+N: <0.02% at 1 kHz maximum output level
  • S/N Ratio: >100dB
Connectors – Video
  • VIDEO IN
  • (1) 8-pin RJ45 female, shielded;
  • CAT5 balanced video input port;
  • Input Impedance: 100 ohms per pair;
  • Connects to CNX-PVID8X3, CNX-PVID8X4, or any "CH" CAT5 video output port
VIDEO OUT
  • (1) 8-pin RJ45 female, shielded;
  • CAT5 balanced video output port;
  • Output Impedance: 100 ohms per pair;
  • Connects to CNX-PBVR4 or any "CH" CAT5 video input port
VIDEO IN 5 – 16
  • (12) RCA female comprising up to 12 video or digital audio inputs;
  • Input Impedance: 75 ohms;
  • Input Level: 1 Vp-p nominal;
  • Signal Sensing Threshold: 0.25 Vp-p;
  • Connect to video/digital audio outputs of local source devices
VIDEO OUT A – L
  • (12) RCA female comprising up to 12 video or digital audio outputs;
  • Output Impedance: 75 ohms;
  • Output Level: 1 Vp-p nominal;
  • Connect to video/digital audio inputs of local display/amplifier devices; may be looped externally to SPDIF A or B inputs
Connectors – Audio
AUDIO (CAT5)
  • (1) 8-pin RJ45 female, shielded;
  • Bi-directional CAT5 balanced audio port;
  • Maximum Input/Output Levels: 4 Vrms;
  • Input/Output Impedances: 600 ohms;
  • Connects to CNX-BIPAD8, CNX-PBAR4, or any "CH" CAT5 audio port
SPDIF A - B
  • (2) RCA female;
  • S/PDIF coaxial digital audio inputs;
  • Input Impedance: 75 ohms

OPTICAL C - D
  • (2) JIS F05 female (TOSLINK) optical fiber connectors;
  • S/PDIF optical digital audio inputs
  • AUDIO IN 2 - 6
  • (10) RCA female comprising (5) unbalanced stereo line-level audio inputs;
  • Maximum Input Level: 2.5 Vrms;
  • Input Impedance: 50k ohms
AUDIO OUT A
  • (2) RCA female;
  • Unbalanced stereo line-level audio output (fixed level/tone);
  • Maximum Output Level: 2.5 Vrms;
  • Output Impedance: 50 ohms (3k ohms minimum load)

AUDIO OUT B
  • (2) RCA female;
  • Unbalanced stereo line-level audio output (variable level/tone);
  • Maximum Output Level: 2.5 Vrms;
  • Output Impedance: 50 ohms (3k ohms minimum load)
SURROUND SOUND OUT – FRONT, SURROUND, BACK, CENTER
  • (7) RCA female;
  • Unbalanced line-level 7.1 Surround Sound audio outputs;
  • Maximum Output Level: 3 Vrms;
  • Output Impedance: 200 ohms;
  • Connect to inputs of CNAMPX-7X200 amplifier
SURROUND SOUND OUT – SUBWOOFER
  • (1) RCA female;
  • Unbalanced line-level subwoofer audio output;
  • Maximum Output Level: 8.5 Vrms;
  • Output Impedance

Product Wiki

Extended Warranty

X

SIGN UP TO WIN BOWERS & WILKINS HEADPHONES

Sign up and be the first one to see new technology.