bigimg1.jpg
rmb1066
Take a Tour
Rotel RMB1066
High Current 6 Channel Amplifier
This model is no longer available.
Availability:
     



The RMB-1066 multi-channel power amplifier is an enormously flexible unit intended primarily for use in surround systems and delivers high power in a variety of configurations. The power supply and output circuits are configured for exceptional reserve capability and stability. In six channel mode, the RMB-1066 delivers 60 watts RMS each (20 Hz to 20 kHz @0.03%THD into 8 ohms). In five channel mode (one channel quiescent), power increases to 70 watts RMS each measured by the same demanding standards. Amplifier pairs can be bridged to develop 150 watts x 3 for almost half a kilowatt of output power. Three rear panel switches (one two-way and two three-way) make bridging easy and also link the inputs via internal "daisy chain " connections with a single source, thus simplifying system wiring. Input level controls, strategically placed between front panel heat sink fins and an extensive 6 LED indicator array ease system adjustment and monitoring. 12 volt trigger operation and a

What's included in the box


  • Frequency Response - 15 Hz - 100 kHz (±1dB)

  • Damping Factor (20 - 20,000 Hz, 8 ohms) - 150

  • Input Overload Level - 5V

  • Signal to Noise Ratio (IHF A network) - 116 dB

  • Input Impedance/Sensitivity - 1.5 V, 22 kohms

  • Power Requirements - 115 volts, 60 Hz (U.S. version), 230 Volts, 50 Hz (European version)

  • Power Consumption - 700 Watts

  • Dimensions (W x H x D) - 430 x 121 x 435 mm; 16 15/16 x 4 3/4 x 17 1/8 inches

  • Weight (net) - 13.5 kg, 29.75 lbs.

Specifications:
 
Continuous Power Output Stereo Mode
(20-20 kHz, <0.03% THD)
6 x 60 watts
Continuous Power Output Bridged Mono Mode
(20-20 kHz, <0.1% THD)
3 x 150 watts/ch into 8 ohms
Watts/Channel
all channels driven, unbridged,
8 ohm load, 20 - 20 kHz, 0.06% THD
60 watts
-
-
THD (20 - 20kHz)
cont. rated power
one-half rated power
one watt per channel

<0.03% maximum
<0.03% maximum
<0.05% maximum
Intermodulation Distortion
(60 Hz: 7 kHz, 4:1)
0.03% maximum
Frequency Response 15 Hz - 100 kHz (±1dB)
Damping Factor
(20 - 20,000 Hz, 8 ohms)
150
Input Overload Level 5V
Speaker Impedance (combined load)
Stereo Mode:
Bridged Mono Mode:
4 ohms minimum
8 ohms minimum
Signal to Noise Ratio
(IHF A network)
116 dB
Input Impedance/Sensitivity
22 k ohms / 1.5 V
Auto Turn On Threshold Level (if activated)
10mV Input Signal
Auto Turn Off Delay Time (if activated) 5 minutes with no signal
Power Requirements:

115 volts, 60 Hz (U.S. version)
230 Volts, 50 Hz (European version)
Power Consumption: 700 Watts
Dimensions (W x H x D):

430 x 121 x 435 mm
16 15/16 x 4 3/4 x 17 1/8 inches

Weight (net): 13.5 kg, 29.75 lbs.