Cisco Meraki MR52- wireless access point
Out of stock
SKU MR52
Radios
2.4 GHz 802.11b/g/n client access radio
5 GHz 802.11a/n/ac client access radio
2.4 & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth radio with Bluetooth Low Energy (BLE) and Beacon support
Concurrent operation of all four radios
Max aggregate frame rate 2.5 Gbit/s
Supported frequency bands (country-specific restrictions apply):
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350 GHz (UNII-2)
5.470-5.600, 5.660-5.725 (UNII-2e)
5.725-5.825 GHz (UNII-3)
Antenna
Integrated omni-directional antennas (5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz)
Individual antenna elements for each radio
802.11ac Wave 2 & 802.11n Capabilities
4x4 multiple input, multiple output (MIMO) with four spatial streams
SU-MIMO and MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 & 40 MHz channels (802.11n); 20, 40, 80, and 160MHz channels (802.11ac)
Up to 256-QAM on both 2.4 & 5 GHz
Packet aggregation
Power
Power over Ethernet: 37 - 57 V (802.3at required; functionality-restricted 802.3af mode supported)
Alternative 12V DC input
Power consumption: 21 W max (802.3at)
Power over Ethernet injector and DC adapter sold separately
Interfaces
2 × 10/100/1000Base-T Ethernet (RJ45)
1 × DC power connector (5.5mm x 2.5mm, center positive)
Mounting
All standard mounting hardware included
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16 or 1 ½" flush or recessed rails), assorted cable junction boxes
Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security
Two security screw options (included)
Kensington lock hard point
Concealed mount plate with anti-tamper cable bay
Environment
Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5 to 95% non-condensing
Physical Dimensions
10.56” x 6.38” x 1.58” (268.2 mm x 162.0 mm x 38.8 mm), not including deskmount feet or mount plate
Weight: 28.9 oz (820g)
Security
Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service
Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
Mobility
PMK, OKC, and 802.11r for fast Layer 2 roaming
Distributed or centralized layer 3 roaming
Analytics
Embedded location analytics reporting and device tracking
Global L7 traffic analytics reporting per network, per device, & per application
Warranty
Lifetime hardware warranty with advanced replacement included
Ordering Information
MR52-HW
Meraki MR52 Cloud Managed 802.11ac AP
MA-PWR-30W-XX
Meraki AC Adapter for MR Series (XX = US, EU, UK, or AU)
MA-INJ-4-XX
Cisco Meraki 802.3at PoE Injector (XX = US, EU, UK, or AU)
Note: Meraki access point license required.
$1,399.00
| Product Name | Cisco Meraki MR52- wireless access point |
|---|---|
| Marketplace_Price | $1,399.00 |
| Product Code | MR52 |
| MSRP Price | 1399.00 |
| Manufacturer | MERAKI |
Highlights
Ideal use cases
Performance-critical wireless LANs
High-density environments
Hardware features
4 radios: 2.4 and 5 GHz, dual-band WIDS/WIPS, and Bluetooth Low Energy (BLE)
4-stream 802.11ac Wave 2, up to 2.5 Gbps
2 × Gigabit Ethernet port
PoE: 802.3at
AC adapter available
Cloud management
Network-wide visibility and control
Self-provisioning for rapid deployment
Automatic reporting
Seamless firmware updates
Enterprise security
802.1X and native Active Directory integration
Air Marshal: real-time WIPS with forensics
Stateful Layer 3-7 firewall
Identity-based group policies
Built-in antivirus scan (NAC)
Guest access
1-click secure guest access
Guest isolation firewall
Customizable splash pages
Integrated Facebook login
RF optimization
Dual-concurrent radios with MU-MIMO support
Radios optimized for rate-vs-range performance
Third radio dedicated to security and RF management
Built-in real-time RF spectrum view
Cloud-based automatic RF optimization
Layer 7 traffic shaping
Classifies hundreds of applications
Create per-application bandwidth limits
Prioritize productivity apps
Restrict or block recreational traffic
Presence location analytics
Measure visitor capture rate, visit length, and repeat visit rate
Measure visitor trends over time and compare performance across locations
Device management
Create device-specific firewall rules
Monitor and track device inventory
Deploy applications and enforce security settings
Write Your Own Review
OUR BRAND PARTNERS
